Middlesbrough, UK GradICE · GradIHE Available immediately

Hello — I'm 👋

Rama Chandrareddy Bommireddy

Civil & Structural Engineer · MSc

I'm a structural engineer who loves turning ideas into buildable, well-checked structures. I design reinforced-concrete and steel — from analysis and member design through CAD/BIM detailing to delivery on site — and I research cold-formed steel behaviour through finite element modelling. I'm progressing toward Chartered Engineer (CEng) with the ICE, and I'm always up for a good engineering challenge. Let's build something that stands the test of time.

View Selected Work →
01

Profile

MSc-qualified civil and structural engineer with 2+ years across reinforced-concrete design, structural analysis, CAD detailing and construction-stage delivery.

I engineer multi-storey RC framing — beams, columns, slabs and foundations — in STAAD.Pro and ETABS, validate it against manual calculations, and produce construction-ready packages through AutoCAD and Revit/BIM workflows. On site, I've led delivery, run 50+ structural inspections and resolved contractor RFIs with CDM-aware practice.

Alongside delivery, I research cold-formed steel behaviour through finite element modelling in ANSYS, and I'm building depth toward UK consultancy work in Tekla Structural Designer, IDEA StatiCa and Tekla Tedds.

MScCivil & Structural Eng.
Teesside University · 2024–25
B.TechCivil Engineering
KSRM College · 2018–22
MembershipsGradICE · GradIHE
PathwayCEng — ICE IPD route
CertifiedSTAAD.Pro · ETABS · AutoCAD 2D
AvailabilityImmediate · Open to relocate UK-wide
02

Capabilities

Analysis & Design Software

STAAD.Pro ETABS ANSYS Mechanical APDL AutoCAD 2D Revit Navisworks Dynamo Civil 3D MATLAB Tekla Structural Designer

Dashed = familiar / actively developing

Codes & Standards

Eurocode 1 — Actions Eurocode 2 — Concrete Eurocode 3 — Steel EC3 Part 1.3 — Cold-formed AISI S100 IS 456 IS 800 UK Building Regs CDM 2015

Technical Practice

RC & steel member design Structural analysis & loading Manual calculation checks Finite element modelling Reinforcement detailing BIM coordination Site inspection & verification RFI resolution Subcontractor coordination
03

Projects

01

4,500 m² Commercial Building — On-Site Delivery

Led on-site structural delivery of a 4,500 m² commercial building: supervised 15–20 operatives, coordinated 3+ subcontractor packages against programme and quality milestones, and applied CDM-aware safe-working practices — completed with zero lost-time incidents.

Site deliverySubcontractor coordinationZero LTICDM-aware
Industry / Delivery
02

Multi-Storey RC Commercial & Institutional Design

Designed reinforced-concrete beams, columns, slabs and foundations in ETABS and STAAD.Pro across feasibility, detailed design and construction stages — cross-checking software output against manual calculations and issuing construction-ready packages via AutoCAD and Revit/BIM workflows.

ETABS · STAAD.ProRC designAutoCAD · RevitIS 456
Industry / RC
03

Sisal Fibre Reinforced Concrete — Strength Study

Led a team assessing the influence of sisal-fibre reinforcement on concrete strength and durability, running material tests and interpreting results into technical reports — supporting low-carbon, sustainable material selection. Applied IS 456 and IS 800 design principles.

Concrete technologyStrength testingSustainabilityTeam lead
Materials / Research
04

G+3 RC Building Analysis (STAAD.Pro)

Modelled and analysed a G+3 reinforced-concrete building in STAAD.Pro — load combinations, member sizing checks and reinforcement layouts — translating analysis output into CAD drawings and structural reports.

STAAD.ProRC frameLoad combinationsDetailing
Analysis & Design
04

Research

Cold-Formed Steel · Web Crippling

Finite element modelling of unlipped channel sections under Concentrated loads

FE modelling in ANSYS Mechanical APDL of cold-formed steel unlipped channels under End-Two-Flange (ETF) and Interior-Two-Flange (ITF) loading conditions, validated against AISI S100 and Eurocode 3 Part 1.3. Originated as my MSc dissertation and extended into ongoing ITF research.

In preparation: Combined ETF/ITF manuscript on CFS web crippling for Thin-Walled Structures.
05

Experience & Education

Jul 2022 – Aug 2024

Structural Engineer / Civil Engineer

PNR Constructions — Andhra Pradesh, India

  • Designed RC beams, columns, slabs and foundations in ETABS and STAAD.Pro, cross-checked against manual calculations before releasing construction-ready packages.
  • Produced AutoCAD drawings and reinforcement layouts, aligned with Revit/BIM workflows for design-to-site coordination.
  • Led on-site delivery of a 4,500 m² commercial building — 15–20 operatives, 3+ subcontractor packages, zero lost-time incidents.
  • Inspected 50+ structural elements against approved drawings and resolved contractor RFIs through structural checks and clarification notes.
  • Maintained drawing registers and revision control across CAD/BIM deliverables.

Selected projects

Multi-storey commercial building — 4,500 m²Reinforced-concrete frame design (beams, columns, slabs and foundations) to IS 456 using ETABS and STAAD.Pro, followed by on-site delivery — coordinating 15–20 operatives and 3+ subcontractor packages to completion with zero lost-time incidents.
Multi-storey institutional buildingStructural analysis and reinforced-concrete design of beams, columns, slabs and foundations in ETABS and STAAD.Pro — including load assessments, lateral-load considerations and member sizing, verified with manual calculation checks. Produced detailed reinforcement layouts reviewed against architectural and M&E information through Revit/BIM-supported workflows, issuing construction-ready packages for site execution.
2021 – 2022

Structural Analysis & Design Intern

Remote

  • Analysed a G+3 RC building in STAAD.Pro — structural models, load combinations and reinforcement layouts.
  • Prepared CAD drawings and structural reports from analysis outputs, building design-to-drawing translation skills.
Sep 2024 – Sep 2025

MSc Civil & Structural Engineering

Teesside University, Middlesbrough, UK

  • Dissertation: FE modelling of cold-formed steel under concentrated web loading (ANSYS APDL).
  • Eurocode-based structural design across steel and concrete.
Jun 2018 – May 2022

B.Tech Civil Engineering

KSRM College of Engineering, Andhra Pradesh, India

  • Foundation in structural analysis, reinforced concrete and construction materials.
Ongoing

Professional Development

ICE — Initial Professional Development (IPD)

  • Progressing toward Chartered Engineer (CEng) status.
  • GradICE & GradIHE member · Certified in STAAD.Pro, ETABS and AutoCAD 2D.
06

Résumé

Download my full CV as a PDF.

↓ Download Résumé (PDF)
Get in touch

Let's build something
that stands up.

Open to civil and structural engineering roles across the UK — immediately available and happy to relocate. I'd welcome a conversation.

ramchandra0366@gmail.com +44 7823 671530 LinkedIn ↗
Ctrl/Cmd + E to toggle